EC Backward Centrifugal Fan Centrifugal Vent

EC Backward Centrifugal Fan Centrifugal Vent

Motor type: BLDC external rotor motor
Impeller Diameter: 280mm
Impeller Material: Galvanized Metal Steel
Direction of Rotation: CW, see on rotor
Speed Control: 0-10VDC/PWM
Type of Protection: IP44 / IP54
Insulation Class: B
Operation Mode: S1
Bearing: Maintenance-free ball bearing
Ambient Temperature: -25~+60℃
Motor Protection: Locked-Rotor Protection, Reverse Polarity Protection, Thermal Protection, Soft Start
Certificate: CE, LVD, ROHS, ETL
Send Inquiry
Description
Technical Parameters

Product Introduction

The ECNITY EC backward centrifugal fan centrifugal vent is a high-efficiency ventilation device that integrates electronic commutation technology with a backward curved centrifugal structure. At its core is a permanent-magnet external rotor EC motor, which eliminates the carbon brush structure found in traditional motors and achieves contactless electronic commutation. This design fundamentally reduces mechanical wear and extends the service life of the equipment to more than 50,000 hours.

The fan adopts a backward-curved blade design, where the blade angles are optimized through computational fluid dynamics (CFD) simulation. After air enters the impeller, it flows smoothly along the curvature of the blades, effectively reducing energy loss caused by airflow turbulence and minimizing vortex noise. The operating noise level can be controlled below 65 dB, making it suitable for noise-sensitive environments.

product-800-800

EC backward centrifugal fan centrifugal vent technical parameters:

 

Model No.

Rated
Voltage

Operation Voltage

Frequency

Rated
Current

Rated Power

Rated
Speed

Air Flow

Air
Pressure

Noise
Level

VAC

VAC

Hz

A

W

RPM

m3/h

Pa

dBA

EN-B280-H050-E115-B01

115

90~135

50/60

2.90

188

2450

1580

550

75

EN-B280-H050-E230-B01

230

184~274

50/60

1.50

188

2450

1580

550

75

 

Outline Drawing:

 

product-1273-664

Performance Curve

 

product-705-499

Connection

 

DC Wire

AC Wire

Color

Function

Color

Function

Red

+10VDC

Brown

L

Blue

GND

Blue

N

Yellow

0~10VDC/PWM

Green/Yellow

PE

White

FG

   

 

The ECNITY EC backward centrifugal fan centrifugal vent supports multiple speed-control methods including 0-10V, PWM, and RS485, enabling precise speed regulation according to actual ventilation requirements. The airflow range covers 260–25,000 m³/h, while the maximum static pressure reaches 1900 Pa. This allows the fan to meet both low-airflow cooling requirements for small equipment and high-pressure ventilation demands for large industrial workshops.

The fan is widely used in HVAC systems, electronic cabinet cooling, and other ventilation applications. All components comply with RoHS environmental standards, ensuring eco-friendly performance and outstanding energy efficiency. Compared with traditional AC fans, energy savings can exceed 50%.

 

1Product details

 

Our factory

 

product-1000-1000
workshop
product-1200-1200
workshop
product-1280-1280
workshop
product-800-800
workshop
product-800-800
workshop
product-800-800
workshop
product-800-800
workshop
product-800-800
workshop
product-1080-1080
workshop
product-1276-1276
workshop
product-1200-1200
workshop
product-1280-1280
workshop
product-1280-1280
workshop
product-1276-1276
workshop
product-800-800
workshop
product-1276-1276
workshop

 

2Typical Applications

4Package and Transportation

 

FAQ

1. What is an EC fan?

An EC fan uses an electronically commutated motor with integrated control electronics. Compared to traditional AC fans, EC fans allow precise speed control without an external inverter. This results in higher efficiency, especially under partial load conditions. EC fans are widely used in HVAC and industrial ventilation systems.

2. What is the difference between an EC fan and an AC centrifugal fan?

The main difference lies in motor technology and control method. EC fans use integrated electronic control, while AC centrifugal fans typically operate at fixed speed. EC fans maintain higher efficiency when operating at reduced speed. They are better suited for modern variable airflow systems.

3. Can EC fans replace traditional industrial fans?

Yes, EC fans can often replace traditional AC industrial fans. They offer improved efficiency and control flexibility. In retrofit projects, system compatibility should be evaluated. EC fans are commonly used to upgrade energy performance.

4. What makes EC fans suitable for HVAC systems?

EC fans provide precise airflow control and high energy efficiency. They integrate easily with building management systems. Variable speed operation allows demand-based ventilation. These features make them suitable for modern HVAC applications.

5. Can EC fans operate under partial load efficiently?

Yes, EC fans maintain high efficiency at reduced speed. The integrated controller optimizes motor performance. This allows airflow to match actual demand. Energy waste is minimized during normal operation.

 

Hot Tags: ec backward centrifugal fan centrifugal vent, China ec backward centrifugal fan centrifugal vent manufacturers, suppliers, factory, high efficiency EC fan, EC Smart Ventilation Fan, cooling fan for power electronics, EC Centrifugal Fan Hvac, fan for heat exchanger, centrifugal kitchen extractor fan