Product Introduction
EC centrifugal PWM control EC fan are designed to deliver highly precise speed and airflow regulation in modern ventilation systems. Pulse Width Modulation (PWM) control adjusts the motor speed by varying the duty cycle of a digital control signal, allowing the EC motor to respond accurately to system demand. Unlike traditional voltage-based speed control methods, PWM provides stable and repeatable performance across the entire operating range.
In an EC centrifugal fan, the PWM signal is processed directly by the integrated motor electronics. This eliminates the need for external frequency inverters or complex control hardware. The result is a compact system architecture with reduced wiring complexity and improved overall reliability. PWM control enables fast response times, allowing the fan to adapt instantly to changes in pressure, temperature, or airflow requirements.
EC Centrifugal Pwm Control Ec Fan Technical Parameters:
|
Model No. |
Rated |
Operation Voltage |
Frequency |
Rated |
Rated Power |
Rated |
Air Flow |
Air |
Noise |
|
VAC |
VAC |
Hz |
A |
W |
RPM |
m3/h |
Pa |
dBA |
|
|
EN-B220-H044-E115-B02 |
115 |
90~135 |
50/60 |
2.70 |
175 |
3560 |
1315 |
970 |
76 |
|
EN-B220-H044-E230-B02 |
230 |
184~274 |
50/60 |
1.35 |
175 |
3560 |
1315 |
970 |
76 |
Outline Drawing
Performance Curve
Connection
|
DC Wire |
AC Wire |
||
|
Color |
Function |
Color |
Function |
|
Red |
+10VDC |
Brown |
L |
|
Blue |
GND |
Blue |
N |
|
Yellow |
0~10VDC/PWM |
Green/Yellow |
PE |
|
White |
FG |
||
One of the key benefits of EC centrifugal fans with PWM control is their ability to maintain stable airflow despite changing operating conditions. In ventilation systems with filters, dampers, or variable air paths, resistance can fluctuate significantly. PWM control allows the EC motor to adjust speed in real time, ensuring that airflow remains within the desired range.
Compared to traditional multi-speed or voltage-controlled fans, PWM-controlled EC centrifugal fans offer smoother speed transitions and improved low-speed stability. This reduces mechanical stress on the motor and impeller, contributing to lower vibration levels and extended service life. The centrifugal fan design further enhances operational stability by maintaining pressure performance even at reduced speeds.
Our factory
FAQ
1. How does airflow control benefit industrial systems?
Adjustable airflow allows systems to match actual process requirements. EC fans enable precise airflow regulation. This improves process stability and reduces energy waste. It also extends component service life.
2. What is the efficiency advantage of EC motors?
EC motors convert electrical energy more efficiently than traditional AC motors. Efficiency remains high across a wide speed range. This reduces energy losses during partial load operation. It makes EC fans ideal for variable speed applications.
3. Can EC fans operate with external sensors?
Yes, EC fans can operate based on external sensor input. Signals from pressure, temperature, or air quality sensors can control speed. This allows automated and responsive system operation. Integration depends on control system design.
4. Are EC centrifugal fans suitable for global markets?
EC centrifugal fans are designed for international applications. Different voltage and control options support various regions. Compliance with local standards should be verified. This makes them suitable for global OEM and project use.
5. What factors should be considered when selecting an EC fan?
Key factors include airflow, static pressure, voltage, and control method. Installation space and operating conditions should also be considered. Reviewing performance curves helps ensure proper selection. Correct selection improves efficiency and reliability.