DC Direct Drive Centrifugal Blower

DC Direct Drive Centrifugal Blower

Motor type: BLDC external rotor motor
Impeller Diameter: 120mm
Impeller Material: Galvanized Metal Sheet
Direction of Rotation: CW, see on rotor
Speed Control: 0-10VDC/PWM
Type of Protection: IP44 / IP54
Insulation Class: B
Operation Mode: S1
Bearing: Maintenance-free ball bearing
Ambient Temperature: -25~+60℃
Motor Protection: Locked-Rotor Protection, Reverse Polarity Protection, Thermal Protection, Soft Start
Certificate: CE, LVD, ROHS, ETL
Send Inquiry
Description
Technical Parameters

Product Introduction

The ECNITY DC direct drive centrifugal blower consist primarily of a brushless DC motor, single-inlet impeller, volute housing, and an external speed controller. The simple structure and reduced number of components result in a low failure rate. The brushless DC motor uses permanent magnets, eliminating excitation losses and significantly improving efficiency compared to brushed DC motors, while avoiding brush wear. Impellers are typically made of galvanized steel or engineering plastics, offering corrosion resistance and low weight. The compact volute design closely follows the airflow trajectory, reducing leakage and improving air delivery efficiency. External speed controllers provide basic speed adjustment but do not support constant pressure or constant airflow control, making them suitable for basic ventilation applications.

product-800-800

DC direct drive centrifugal blower technical parameters:

 

Model No.

Rated
Voltage

Operation Voltage

Rated
Current

Rated
Power

Rated
Speed

Air Flow

Air
Pressure

Noise
Level

VDC

VDC

A

W

RPM

m3/h

Pa

dBA

EN-F120-H062-D024-A01

24

18~32

2.50

60

2400

280

350

58

EN-S120-H062-D024-A01

EN-F120-H062-D048-A01

48

36~57

1.25

60

2400

280

350

58

EN-S120-H062-D048-A01

 

Outline Drawing:

 

product-1536-660

Performance Curve

 

product-834-510

Connection

 

DC Wire

Color

Function

Red

024 / 048VDC

Blue

GND

Yellow

0~10VDC/PWM

White

FG

 

Case of DC direct drive centrifugal blower: Small Warehouse Basic Ventilation

An 80 m² hardware storage room required basic ventilation to remove humidity and light dust. Two DC single-inlet centrifugal blowers with airflow of 1000 CFM and static pressure of 0.8 PSI were installed using floor mounting.

Speed was adjusted via external rotary controllers, requiring no specialized training. Maintenance involved monthly cleaning and semiannual inspection. After two years of operation, only one speed controller was replaced at minimal cost, fully meeting basic ventilation needs.

 

product-850-850

 

Our factory

 

product-1000-1000
workshop
product-1200-1200
workshop
product-1280-1280
workshop
product-800-800
workshop
product-800-800
workshop
product-800-800
workshop
product-800-800
workshop
product-800-800
workshop
product-1080-1080
workshop
product-1276-1276
workshop
product-1200-1200
workshop
product-1280-1280
workshop
product-1280-1280
workshop
product-1276-1276
workshop
product-800-800
workshop
product-1276-1276
workshop

 

2Typical Applications

4Package and Transportation

 

FAQ

1. Are forward curved fans sensitive to voltage fluctuation?

EC and DC versions are less sensitive to voltage fluctuation due to built-in electronic control.

2. Can forward curved fans support smart control systems?

Yes. EC models can be integrated with smart controllers and building management systems.

3. Are forward curved fans suitable for air curtain units?

In some air curtain designs, forward curved fans are used for compact airflow solutions.

 

Hot Tags: dc direct drive centrifugal blower, China dc direct drive centrifugal blower manufacturers, suppliers, factory, direct drive centrifugal blower, DC Low Noise Centrifugal Blower Fan, Brushless Centrifugal Blower, DC Brushless Centrifugal Blower, DC Exhaust Centrifugal Blower, DC Single Inlet Centrifugal Blower