Product Introduction
The ECNITY 146mm EC Double inlet centrifugal blower is driven by a DC motor and leverages the structural advantages of a dual-inlet design to balance high airflow capacity and compact size. It operates on DC power and is available in both brushed and brushless configurations. Brushless DC models use electronic commutation to eliminate carbon brush wear, achieving a service life of 60,000–100,000 hours.
The double-inlet structure allows airflow to converge symmetrically into the impeller, where centrifugal force generates stable static pressure. This design delivers high airflow with moderate static pressure. The housing is integrally injection-molded from flame-retardant PBT material, resulting in a compact form factor and flexible installation suitable for space-limited environments.

146mm EC Double inlet centrifugal blower technical parameters:
|
Model No. |
Rated |
Operation Voltage |
Frequency |
Rated |
Rated Power |
Rated |
Air Flow |
Air |
Noise |
|
VAC |
VAC |
Hz |
A |
W |
RPM |
m3/h |
Pa |
dBA |
|
|
EN-D146-H190-E115-B01 |
115 |
90~135 |
50/60 |
2.80 |
190 |
1900 |
1350 |
570 |
75 |
|
EN-D146-H190-E230-B01 |
230 |
184~274 |
50/60 |
1.40 |
190 |
1900 |
1350 |
570 |
75 |
Outline Drawing:

Performance Curve

Connection
|
DC Wire |
AC Wire |
||
|
Color |
Function |
Color |
Function |
|
Red |
+10VDC |
Brown |
L |
|
Blue |
GND |
Blue |
N |
|
Yellow |
0~10VDC/PWM |
Green/Yellow |
PE |
|
White |
FG |
||
The ECNITY 146mm EC double inlet centrifugal blowers adopt a compact external rotor motor design with high integration between the motor and impeller. This minimizes inlet airflow losses and further improves overall efficiency. Impellers are typically made of aluminum-magnesium alloy and undergo precision dynamic balancing. Hollow airfoil blade designs reduce weight and aerodynamic noise, keeping vibration levels below 2.5 mm/s, significantly better than the industry average of 5mm/s.
The ECNITY 146mm EC double inlet centrifugal blowers are typically used in medium-to-large industrial and commercial applications, requiring high material durability and corrosion resistance. Volutes are made from die-cast aluminum alloy or galvanized steel, offering excellent resistance to corrosion and impact. Impellers are constructed from aluminum-magnesium alloy or engineering plastics with anti-corrosion treatment and smooth blade surfaces to reduce airflow resistance and extend service life.

Our factory


















FAQ
1. Can EC fans be applied in data room or server cooling?
EC fans are suitable for data room and server cooling applications. Variable speed allows airflow to adjust to heat load. High efficiency helps reduce energy consumption. Reliability is critical in these environments.
2. Can EC fans be used in ceiling-mounted ventilation units?
EC fans are suitable for ceiling-mounted ventilation units. Compact design helps save installation space. Low noise operation improves comfort. Proper mounting ensures stable operation.
3. Are EC fans suitable for industrial exhaust hoods?
EC centrifugal fans are suitable for industrial exhaust hoods. They can handle duct resistance and varying airflow demand. Speed control helps optimize exhaust performance. Correct sizing is important for safety.
4. Can EC fans be used in make-up air systems?
EC fans are used in make-up air systems to supply fresh air. Adjustable airflow supports balanced ventilation. High efficiency reduces operating costs. Integration with control systems is common.



