Product Introduction
The ECNITY DC Cabinet cooling centrifugal fan, by contrast, are limited to standard clean air ventilation and are not suitable for corrosive or impurity-laden media. Due to limited corrosion resistance and contamination tolerance, exposure to corrosive gases rapidly damages the volute and impeller, while particulate-laden air easily enters the motor, accelerating wear and reducing service life. Brushless DC models may handle slightly dusty air when equipped with dedicated filters, whereas brushed DC models are restricted to clean, dust-free, non-corrosive air only. Overall, their medium adaptability is far inferior to EC models and suitable only for basic clean-air ventilation.

DC Cabinet cooling centrifugal fan technical parameters:
|
Model No. |
Rated |
Operation Voltage |
Rated |
Rated |
Rated |
Air Flow |
Air |
Noise |
|
VDC |
VDC |
A |
W |
RPM |
m3/h |
Pa |
dBA |
|
|
EN-F140-H059-D024-B01 |
24 |
18~32 |
5.00 |
120 |
2250 |
450 |
460 |
68 |
|
EN-S140-H059-D024-B01 |
||||||||
|
EN-F140-H059-D048-B01 |
48 |
36~57 |
2.50 |
120 |
2250 |
450 |
460 |
68 |
|
EN-S140-H059-D048-B01 |
||||||||
|
EN-F140-H059-D024-B02 |
24 |
18~32 |
5.80 |
140 |
2650 |
590 |
600 |
72 |
|
EN-S140-H059-D024-B02 |
||||||||
|
EN-F140-H059-D048-B02 |
48 |
36~57 |
2.90 |
140 |
2650 |
590 |
600 |
72 |
|
EN-S140-H059-D048-B02 |
Outline Drawing:

Performance Curve

Connection
|
DC Wire |
|
|
Color |
Function |
|
Red |
024 / 048VDC |
|
Blue |
GND |
|
Yellow |
0~10VDC/PWM |
|
White |
FG |
The DC Cabinet cooling centrifugal fan offer limited calibration convenience. Brushless DC models require manual on-site calibration involving partial disassembly and external instruments, taking 20–30 minutes with accuracy around ±8%, and calibration records cannot be stored. Brushed DC models lack true calibration capability and rely on rough voltage or current adjustment only.

Our factory


















FAQ
1.Do forward curved fans require external controllers?
EC versions usually have integrated control electronics and do not require external frequency inverters. Control signals such as 0–10V or PWM are commonly supported.
2.Are forward curved centrifugal fans suitable for low-noise applications?
They can be suitable when operated at optimized speed and installed with proper insulation. EC motor control helps reduce unnecessary noise caused by over-speeding.
3.What materials are forward curved fan impellers made of?
Impellers are commonly made of galvanized steel, aluminum, or plastic. Material choice depends on application requirements and operating environment.
4.Can forward curved fans handle clean air only?
They are mainly designed for clean or lightly contaminated air. Heavy dust or sticky particles may reduce performance and lifespan.



