Product Introduction
The ECNITY DC quiet low pressure centrifugal blower are limited in load adaptability. Brushless DC models can handle constant or mildly variable loads but cannot respond quickly to large fluctuations, risking overload or pressure spikes. Brushed DC models support only fixed constant loads; any load change leads to speed drop and insufficient airflow, restricting use to basic, stable-load applications.
DC quiet low pressure centrifugal blower technical parameters:
|
Model No. |
Rated |
Operation Voltage |
Rated |
Rated |
Rated |
Air Flow |
Air |
Noise |
|
VDC |
VDC |
A |
W |
RPM |
m3/h |
Pa |
dBA |
|
|
EN-F140-H059-D024-A01 |
24 |
18~32 |
3.30 |
80 |
1800 |
420 |
350 |
63 |
|
EN-S140-H059-D024-A01 |
||||||||
|
EN-F140-H059-D048-A01 |
48 |
36~57 |
1.65 |
80 |
1800 |
420 |
350 |
63 |
|
EN-S140-H059-D048-A01 |
Outline Drawing：
Performance Curve
Connection
|
DC Wire |
|
|
Color |
Function |
|
Red |
024 / 048VDC |
|
Blue |
GND |
|
Yellow |
0~10VDC/PWM |
|
White |
FG |
The DC quiet low pressure centrifugal blower perform poorly at low temperatures. Brushless DC models require 5–10 minutes of preheating at –10°C and achieve only about 80% start success. Brushed DC models often fail to start below 0°C due to coil icing and poor brush contact, making them unsuitable for cold or outdoor applications.
Our factory
FAQ
1.Are forward curved fans suitable for air filtration units?
Yes. They are commonly used in filtration and air purification equipment where moderate pressure and steady airflow are required.
2.What mounting orientations are supported?
Forward curved centrifugal fans can typically be installed in multiple orientations depending on housing design. Installation guidelines should be followed to ensure performance.
3.Can forward curved fans operate at variable speeds?
Yes. Variable speed operation is a key advantage, especially with EC motors. It helps optimize airflow and energy consumption.
4.Are forward curved fans easy to maintain?
Maintenance is relatively simple. Regular inspection and cleaning help maintain airflow performance and extend service life.