In 1862, British engineer Guibal invented the centrifugal fan, whose impeller and casing were concentric circles. The casing was made of brick, and the wooden impeller used backward-curved blades, with an efficiency of only about 40%, mainly used for mine ventilation.
In 1880, a volute casing and a centrifugal fan with backward-curved blades were designed for mine ventilation, and the structure was already quite sophisticated.
In 1892, France developed the cross-flow fan; in 1898, an Irishman designed the Sirocco-type centrifugal fan with forward-curved blades, which was widely adopted by various countries; in the 19th century, axial-flow fans were already used in mine ventilation and blast furnaces in the metallurgical industry, but their pressure was only 100-300 Pa, and the efficiency was only 15-25%, and it did not develop rapidly until after the 1940s.
In 1935, Germany first used axial-flow isopressure fans for boiler ventilation and induced draft; in 1948, Denmark manufactured an axial-flow fan with adjustable blades during operation; rotary axial-flow fans, meridional acceleration axial-flow fans, mixed-flow fans, and cross-flow fans were also developed; in 2002, China's explosion-proof centrifugal fans were widely used in chemical, petroleum, machinery, and other fields, and Changlin Dong explosion-proof centrifugal fans also developed. Centrifugal fans are commonly used auxiliary production equipment in stone processing enterprises, mainly used in ventilation and dust removal devices. For example, cyclone dust collectors and bag dust collectors in stone cutting and grinding processes all require the use of centrifugal fans to remove dust from the production site, ensuring a clean production environment and protecting the health of producers. Fans are energy-intensive equipment, and the proportion of electricity consumed by centrifugal fans in stone processing is relatively large. With the current increasing shortage of energy in my country and the promotion and application of high-yield and high-efficiency working faces, energy saving and consumption reduction have become a common concern for stone production enterprises. Many stone production enterprises regard reducing the power consumption of fans as an important task. Besides improving the efficiency of the fan itself, the most important factor in reducing fan power consumption is the rational selection of the fan control method. Because the load in stone production constantly changes with process requirements, most fans need to frequently adjust their flow rate according to the main equipment load. Currently, the energy-saving control methods for fans in stone processing enterprises are relatively outdated, generally using throttling control. When using throttling control, the fan flow rate is mainly adjusted by regulating valves or throttling baffles. The throttling amount is large, sometimes exceeding 50% at low loads. Due to throttling losses and operation outside the high-efficiency zone, energy waste is very serious. However, by adjusting the fan speed, throttling losses can be eliminated, and the fan can always operate in the high-efficiency zone, thus significantly saving energy. Adjusting the fan speed is an effective energy-saving method and reflects the current trend in the building materials industry.



